- Uni-Coag is a flocculating/coagulating powder for separating the solids from paint waste water.
- Works very quickly, can be used with all water-based paint waste water systems.
- Dosage for average use is approximately 40 grams per 30 litres of water.

Instructions for use:
- Sprinkle the appropriate dose UniCoag into the contaminated water.
- Use a stirrer to mix the powder thoroughly. Recommended using a stirrer in a battery drill.
- Mix until the agent can be seen activating and separation occurring.
- Leave for approx. 15 ? 30 minutes to allow complete activation.
- The water should be seen as clear on top of the paint solids.
- Pour off water through UCF filter material for re-use if required.
- Dispose of sold material as non-hazardous dry waste.