skip to Main Content

Resene Automotive and Light Industrial have an industry leading product line available for various applications.

With a complete range of water based and solvent based products for light industrial applications, Resene has not only a full range of products, but a full range of products that can achieve the full Resene colour range, and the longevity of colour in our tough environment.

PRIMERS

Armourcote WB905 Primer is a 1-Pack waterborne light anti-corrosive Primer, designed specifically for the light industrial market and associated industries.  TECHNICAL DATA SHEET

Armourcote WB910 Anti-corrosive Primer is a 1-Pack waterborne anti-corrosive primer, designed specifically for the light industrial market and associated industries. This fast drying hi-build primer covers extremely well and has good sand-ability. Excellent anti corrosive properties. TECHNICAL DATA SHEET

AquaLAQ Quick Dry Sealer is a unique extremely quick drying waterborne sealer for furniture, joinery and cabinetry, available in clear and white. waterborne sealer in that it will seal off grain raising in MDF and drastically reduce sanding labour. Two coats are normally all that is required to achieve full coverage, and provide a sound, flat, and high quality substrate ready to be top coated, with minimal sanding. LEARN MORE

 

Fleetprime Hi Build is a single pack modified alkyd inhibitive primer for general industrial and heavy steel chassis priming with excellent application and performance properties. For use with the following Resene topcoats: High Solids Acrythane, Std 805 Acrythane, Spraying Enamel, on correctly prepared steel and other ferrous substrates. Ideally this product is used with Resene topcoats as mentioned above however alternative topcoats can be applied but it is highly recommended that you test a small sample area first to ensure compatibility of your particular topcoat with desirable finish and product performance. TECHNICAL DATA SHEET

Steel Pro Primer is A fast drying primer with good anti-corrosive properties formulated for use with enamel topcoats on steel, and other ferrous metals. This product has very good inhibitive properties and recoat-ability. TECHNICAL DATA SHEET

440 Industrial Primer is a 2 Pack Polyamide cured inhibitive Epoxy primer. Maybe top coated with a wide range of top coats for the Commercial Transport and light industrial markets. Formulated for use with the following topcoats: High Solids Acrythane, Std 805 Acrythane, Spraying Enamel, on correctly prepared steel and other ferrous substrates. Ideally this product is used with topcoats as mentioned above however alternative topcoats can be applied but it is highly recommended that you test a small sample area first to ensure compatibility of your particular topcoat with desirable finish and product performance. TECHNICAL DATA SHEET

Durepox Primer is a unique highly pigmented free sanding 2-pack epoxy urethane primer. Formulated for the marine, automotive refinish, industrial and aircraft markets. Remarkable flexibility and adhesion to bare metal Durepox is a top of the range primer. LEARN MORE

Etch Primer 81A Yellow, An acid-cured vinyl-butyral/phenolic resin combination-etch primer suitable for use on all ferrous and non-ferrous metals. This highly rust inhibitive primer is applied as a wash primer. It is non-sanding with excellent metal adhesion qualities and may be over coated with any RALI one pack or two-pack primer / surfacer / filler. TECHNICAL DATA SHEET

TOP COATS

Armourcote WB943 Top Coat is a single pack gloss top coat, specifically designed for refurbishing light industrial machinery or other steel items. This very fast drying, high build product works most efficiently when applied through industry standard spray equipment such as air assisted airless, airless conventional, pressure pot or suction, gravity type spray guns. The one to one and a half coat application, allows increased productivity, excellent coverage and dries to a gloss finish. TECHNICAL DATA SHEET

ContainerShield Interior has been created specifically for the interior of shipping containers, but is also suitable for top coating most interior steel components. The product is formulated to a light grey colour which is the standard for container interiors, but has been designed to ensure one coat coverage, with excellent coverage and hiding characteristics. This ensures that a standard 20FT shipping container interior can be coated quickly and efficiently. Very low VOC and Assure Quality pending for food safety, including very low odour and fast cure means shipping containers can be closed up sooner. TECHNICAL DATA SHEET

ContainerShield Exterior is a high build, fast dry, hard and durable coating. It is easy to apply and covers extremely well, with a semi gloss finish. Teamed with the Resene Total Colour system for maximum colour choice and peace of mind in colour consistency and longevity, this coating is designed to keep performing for years. TECHNICAL DATA SHEET

AquaLAQ Colour Coat, Single pack waterborne acrylic with an extremely durable finish. AquaLAQ Colour Coat is for furniture, joinery and cabinetry, designed to be touch dry in minutes, dries to a natural satin finish, with a smooth silky feel. The new generation rheology of the product means less work in application and reduced or eliminated sanding and reapplication. It can be top coated with AquaLAQ Clears or 2 pack urethanes if required.

AquaLAQ Colour Coat is available in the complete Resene Total Colour System, which includes Resene Metallic finishes. Special colours can be matched on request. LEARN MORE

626 Spraying Enamel is a premium easy to use air dry, high gloss, high build alkyd enamel with excellent flow and durability. Highly recommended for Automotive and Industrial finishes. TECHNICAL DATA SHEET

Equipment Enamel is a fast-drying gloss enamel principally designed for spraying onto implements and machinery where production costs and time saving are important. Equipment Enamel is designed for use in applications, which require an economic protective yet decorative coating. TECHNICAL DATA SHEET

Acrythane 805 Top Coat, A premium two pack Acrylic-Urethane topcoat exhibiting the following benefits:
Excellent Gloss and abrasion resistance
Excellent exterior durability, highly resistant to yellowing and chalking.
Good UV Resistance.
Excellent chemical, solvent resistance and polishability
TECHNICAL DATA SHEET

High Solids Acrythane, A high-solids two pack Acrylic/ Polyester-Urethane topcoat exhibiting the following benefits:
Excellent Gloss
Hard abrasion resistance finish.
Excellent exterior durability, highly resistant to yellowing and chalking.
Good U.V. Resistance.
Excellent chemical & solvent resistance.
TECHNICAL DATA SHEET

Epacryl 550, Isocyanate-free 2-pack acrylic epoxy topcoat exhibiting a tough, durable, chemical-resistant finish suitable for light industrial applications, best used over Isocyanate-free RALI 440 Industrial Primer to complete the RALI Isocyanate-free paint system. Epacryl 550 has excellent coverage and its quick dry properties, allows early handling of coated items. TECHNICAL DATA SHEET

CLEAR COATS

AquaLAQ Clear Coat, A single -pack, waterborne clear for furniture, joinery and cabinetry available in three gloss levels: matte, satin and gloss. AquaLAQ Clear Coat has excellent coverage and dries extremely fast under the correct conditions to a hard durable UV stable finish. AquaLAQ clear coat is recommended over Colour Coat where extra durability or if gloss levels other than satin is required. LEARN MORE

Durepox High Performance Clear, 2-pack epoxy urethane clear coating. Used as a clear coating for substrates which are coated with pigmented Durepox Primer/Topcoat or directly over bare carbon fibre and fibreglass, veneer coated ply and most wood substrates and concrete. LEARN MORE

Durepox Xtreme Clear, 2-pack epoxy urethane clear coating which has been optimised to provide increased UV, temperature and abrasion resistance. Specifically designed for foils and daggerboards on America’s Cup boats. LEARN MORE

Hypershield a highly flexible, single pack acrylic-urethane clear coat for vinyl curtains and other flexible substrates. Hypershield® cures to a hard yet flexible finish which is easy to clean. LEARN MORE

Back To Top
×Close search
Search