A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
Features & Benefits:
- Excellent primer for water and many aqueous chemicals immersion service when topcoated with an approved finish
- Excellent adhesion to difficult substrates
- Excellent holding primer
- Excellent corrosion resistance
- Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
- Approved for use in NZ Food Processing Plants (see "Approvals NZ/AU" section)
- AS4020 Potable Water Approval (see "Approvals NZ/AU" section)
- Good abrasion resistance
- Very good aged re-coatability
- Resists splash and spillage or fumes of a wide range of chemicals
- Easy application by brush, roller or spray
- Ideal tie-coat over inorganic zincs
- Versatile - can be used on most substrates under many different types of topcoat
- Long pot-life
- Excellent maintenance touch-up primer for hand-cleaned substrates
- A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
- Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series – Carboguard 504 Grey is preferred. Refer to Technical Services for further advice