- High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating.
- Satin finish.
- Available in seven colours.
- Colours conform to British Safety Colour standards.
- Excellent adhesive qualities.
- Forms a tough coat for long-term protection.
- Heat Resistance - Up to 120°C.
- Zinc enriched for corrosion protection factor 36 (up to 3 years before recoating is necessary, depending on conditions).
- Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours.
- Easy re-application over existing film and/or clean surfaces.
- For ongoing protection - Single coat - No overcoating required. For additional protection, prime metal surface with CRC Zinc It or CRC (Prep It prior to applying CRC Coloured Zinc).
- Ready to Use Aerosol.
- No additional mixing or chemical additives required.
- Easy application. No clean up.
- Does not contain CFCs, methylene chloride.
- MPI Approved C23.